Concrete Fastening Systems Unveils Anchor
December 18
13:29
2017
The following is a press release provided to GlobalFastenerNews.com. Contact the individual company for additional information.
Concrete Fastening Systems, Inc. introduces the CONFAST® Single Expansion Anchor.
The CONFAST®single expansion anchors are designed for anchoring into concrete, brick or block base material.
This light to medium-duty fastener is manufactured from Zamac, a non-rusting material, and is available in diameters ranging from ¼” to ¾”. The single expansion anchor is set flush with the base material and inserting a machine-threaded bolt into the anchor expands it against the concrete at a single point.
Technical Specifications for Single Expansion Anchors
Considerations when using the single expansion anchor include anchor diameter, bolt diameter, and required hole size. The single expansion anchor is an effective fastener when working with soft masonry or base materials of questionable strength. Anchor size refers to the diameter of the machine bolt/screw used to expand this anchor. Once all of these factors have been determined, you can find the expected holding values in the technical information below:Length
To determine the length of machine bolt required, add the thickness of the material to be fastened plus the length of the single expansion anchor.
To determine the length of machine bolt required, add the thickness of the material to be fastened plus the length of the single expansion anchor.
Spacing
The forces on a Single Expansion Anchor are transferred to the material in which it is installed. If the anchors are installed too close together, it can cause an interaction of the forces, thus reducing the holding power. As a rule of thumb, the expansion anchor industry has established a minimum standard of ten (10) anchor diameters for spacing between anchors and five (5) anchor diameters from an unsupported edge. When vibration or sudden impact is part of the load conditions, the spacing should be increased.
The forces on a Single Expansion Anchor are transferred to the material in which it is installed. If the anchors are installed too close together, it can cause an interaction of the forces, thus reducing the holding power. As a rule of thumb, the expansion anchor industry has established a minimum standard of ten (10) anchor diameters for spacing between anchors and five (5) anchor diameters from an unsupported edge. When vibration or sudden impact is part of the load conditions, the spacing should be increased.
Values shown are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1 or 25% is generally accepted as a safe working load. Reference should be made to applicable codes for the specific working
“CONFAST® Single Expansion Anchors can now be purchased online.
With free shipping on orders of $25 or more, and all sizes in stock for immediate shipment, we save our customers both time and money over buying concrete fasteners through a distributor,” explained Bob Carlisle, president and founder of Concrete Fastening Systems, Inc. “Our CONFAST© brand of fasteners are of construction grade and heavy duty quality.”
Concrete Fastening Systems, Inc. has been selling concrete fasteners for 30 years from a fully stocked warehouse in Cleveland, Ohio. Free, same-day shipping of anchors in every length and diameter is available by ordering at www.confast.com, followed by product delivery within 1-3 days.
There are no comments at the moment, do you want to add one?
Write a comment